Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

Forced Convection Chamber Furnaces up to 500 Liter Safety Technology

Nabertherm

Forced Convection Chamber Furnaces up to 500 Liter Safety Technology

Due to their very good temperature uniformity, these chamber furnaces with air circulation and safety equipment based on EN 1539 Type A are especially suitable for processes such as drying paints or components with residues of flammable cleaning agents or the evaporation of solvents bound in the components.

Price on request

Forced Convection Chamber Furnaces up to 675 Liter electrically heated

Nabertherm

Forced Convection Chamber Furnaces up to 675 Liter electrically heated

The very good temperature uniformity of these chamber furnace with air circulation provides for ideal process conditiones for annealing, curing, solution annealing, artificial ageing, sintering of PTFE, preheating, or soft annealing and brazing. The forced convection chamber furnaces are equipped with a suitable annealing box for soft annealing of copper or tempering of titanium, and also for annealing of steel under non-flammable process gases. The modular forced convection chamber furnace design allows for adaptation to specific process requirements with appropriate accessories.

Price on request

FTIR 7800A Fourier Transform Infrared Spectrometer

PG Instruments

FTIR 7800A Fourier Transform Infrared Spectrometer

Michelson Interferometer FTIR Spectrophotometer with a spectral range of 7800 to 350cm-1. The 7800 has a small foot print with fully sealed and dust proof interferometer optics.

Price on request

Linetronics

Fuel Blending

Additional Instruments Aniline Bitumen Blends Calorimetry Centrifuge Cold Behaviours Colourimetry Corrosion Demulsibility and Foaming Densimetry Distillation Flash Point Gum - Rubber Hydrometers LPG Lubricating Greases and Oils Oxidation Penetration Residues Rust Sediments Sulfur Thermometers Vapour Pressure Viscosimetry Water Wax

Price on request

Oxford Instruments

GeoSpec Rock Core Analyzer

GeoSpec benchtop TD-NMR determines key properties of rock cores, reservoirs, and fluids, accurately measuring oil and water volumes, porosity, permeability, wettability, capillary pressure, and saturation. Designed to replicate logging tools, it supports high-pressure, high-temperature studies, enables advanced petrophysics investigations, enhanced oil recovery (EOR), and carbon capture and storage (CCS / CCUS) research using intuitive software.

Price on request

Scavini

Glassware Corrosion Test

Innovative equipment acc. to ASTM D1384 with solid block heating, touch-screen interface and mass-flow controllers that permit to maintain a constant air flow even in case of fluctuation of inlet air pressure: temperature and air flow are recorded and plotted on a chart on the screen. The instrument is also fitted with a water distributor and sink for condensers cooling water and a device that permits to maintain the the condensers themselves in position while removing the sample containers at the end of the test.

Price on request

ICP5000 Dual View Inductively Coupled Plasma (ICP-OES)

PG Instruments

ICP5000 Dual View Inductively Coupled Plasma (ICP-OES)

The ICP5000 Dual View ICP system offers ultra low level analysis by axial and radial view analysis at the same time thus allowing fast, precise analysis of complex matrices such as drinking waters, high concentrated brines, organics solvents to name but a few. The ECO Mode, gives a low standby power of the plasma minimising start up times and reduces gas consumption and sample uptake. The wide spectral range of the spectrometer, purged with either nitrogen or argon, allows the analysis of elements far into the UV. 27.12 MHz Solid State, maintenance free, water cooled RF generator with a power output of 500-1600 Watts reacts to changes in plasma load, providing stable and consistent power supply into the plasma when switching between samples of high or varying matrix. The Coupling efficiency of ICP5000DV is better than 75%.

Price on request

$Infracal Total Oil & Grease Analyzer$

Biolab

Infracal Total Oil & Grease Analyzer

Price on request

Lumex

InfraLUM FT-08

Fourier Transform Infrared spectrometer InfraLUM FT-08 is designed for both qualitative and quantitative analysis for chemical, pharmaceutical, and oil and gas industries, as well as environmental monitoring, and forensic investigations This multipurpose and easy-to-operate instrument provides a well-suited option for various analytical laboratories. The high-quality misalignment-proof optics, high-sensitivity DLATGS detector, and a wide variety of accessories ensure the users’ absolute confidence in the high accuracy of the measurement data and make it an ideal tool for routine measurements a

Price on request

Chromos

Integrated Analyzer Systems & Shelters

Turnkey integrated analyzer systems housed in environmentally controlled shelters for field and industrial gas-analysis installations.

Price on request

Peak Instruments

L-510 Tablet pH Meter

1. 5 inch LCD screen with wide 150° viewing angle, beautiful and compact design.

Price on request

Peak Instruments

L-511 Conductivity Meter

1. 5 inch LCD screen with wide 150° viewing angle, beautiful and compact design.

Price on request

Peak Instruments

L-512 Dissolved Oxygen Meter

1. 5 inch LCD screen with wide 150° viewing angle, beautiful and compact design.

Price on request

Biolab

L2000 DX PCB Measurement System

Price on request

Lumex

Light-915

Light-915 Mercury Analyzer is a compact instrument for determining high concentrations of mercury to control workplace environment and provide for sanitary control Light-915 Mercury Analyzer is a compact instrument designed to address the problems of mercury pollution in a workplace environment and sanitary control. As with all the other Lumex mercury analyzers, the principle of measurement of Light-915 is based on atomic absorption spectrometry with Zeeman background correction, which eliminates the effect of interfering impurities. It is the only instrument with high sensitivity and selectiv

Price on request

Lumex

Light-915M2

Light-915M2 is a compact, portable mercury analyzer designed for convenient direct Hg measurement in air Light-915M2 is a compact instrument engineered for convenient direct analysis of mercury in air. Its key benefits such as real-time operation, low detection limit, and a robust design make it a perfect tool to address problems of mercury pollution in a workplace environment and sanitary control.

Price on request

Loss On Heating Of Asphaltic Compounds And The Combined Effect Of Air And Heat On Bitumens,

Scavini

Loss On Heating Of Asphaltic Compounds And The Combined Effect Of Air And Heat On Bitumens,

The apparatus consists of a convection oven manufactured as described in the ASTM E 145 specification (type IB), suitable for temperatures up to 180°C and equipped with a rotating shelf inside. An electronic controlled motor with gear reducer mounted on the top of the oven rotates the shelf at 5.5 rpm.

Price on request

Lumex

Mercury Monitor RA-915AM

RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive measurements of background Hg concentrations and is compliant with the European standard EN 15852 for ambient air monitoring.

Price on request

Lumex

Mercury Monitor RA-915AMNG

RA-915AMNG monitor for natural gas allows direct rapid analysis of mercury in natural gas RA-915AMNG monitors are designed for continuous mercury measurements in a natural gas stream and are ideal for permanent unattended installation at the gas monitoring stations.

Price on request

Lumex

Mercury Monitoring Toolkit

Mercury Monitoring Toolkit for on-site determination of total mercury emissions in accordance with the US EPA’s method 30B Sorbent Trap method is the most cost-effective and accurate method for measuring mercury content in flue gases that involves sampling using paired sorbent traps with subsequent laboratory analysis. The United Nations Environment Programme considers the sorbent trap method to be one of the BAT/BEP (best available techniques/best environmental practices) for mercury emissions monitoring.

Price on request

Lumex

MGA-1000

MGA-1000 graphite furnace atomic absorption spectrometer (AAS) Graphite Furnace Atomic Absorption Spectrometry (GFAAS) provides optimal combination of high selectivity and sensitivity with low running cost. The unique ZHFPM background correction technique ensures effective compensation of intense and rapidly changing spectral interferences and brings routine analysis of complex samples to new heights.

Price on request

PG Instruments

Micro-Wave Digestion 8200

Elemental techniques such as AA, ICP-OES, ICP-MS or XRF. Most of these techniques, require the sample to be dissolved prior to analysis. As analysis techniques continue to improve and become more sensitive, an even greater emphasis is being placed on methods of sample preparation that avoid risks of contamination. Microwave digestion is now recognised world wide as the most robust sample prep technique for AA, ICP-OES, or ICP-MS analyses. Microwave digestion involves combining the sample matrix and acids in a pressurized container and elevating the solution past the boiling point of the acid which significantly accelerates the digestion. Given the high operating temperatures and pressures, microwave digestion can be applied to a wide range of samples particularly environmental, agricultural, soils, food, feed, pharmaceutical products to name but a few. Thus producing a fully uniform dissolved sample simply, quickly and safely.

Price on request

PG Instruments

Microwave Digestion Range 8300

Elemental techniques such as AA, ICP-OES, ICP-MS or XRF. Most of these techniques, require the sample to be dissolved prior to analysis. As analysis techniques continue to improve and become more sensitive, an even greater emphasis is being placed on methods of sample preparation that avoid risks of contamination. Microwave digestion is recognised World Wide as the most robust sample prep technique for AA, ICP-OES, or ICP-MS analyses. Microwave digestion involves combining the sample matrix and acids in a pressurized container and elevating the solution past the boiling point of the acid which significantly accelerates the digestion. Given the high operating temperatures and pressures, microwave digestion can be applied to a wide range of samples particularly environmental, agricultural, soils, food, feed, pharmaceutical products to name but a few. Thus producing a fully uniform dissolved sample simply, quickly and safely.

Price on request

Hitachi

Mobile Optical Emission Spectrometer

Spark mobile optical emission spectrometers (OES) excel at providing full chemistry of critical alloy elements at low detection limits that handheld X-ray and LIBS analyzers can't: carbon, phosphorus, sulfur, boron, arsenic and tin in low alloy and stainless steels, and nitrogen in duplex steels.

Price on request

Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123 Use the contact form