Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

Featured

Hitachi

EA-1400

Compact WDXRF spectrometer for trace elemental analysis with superior peak resolution.

Price on request

Featured

Hitachi

LAB-X5000

The ultimate elemental analysis tool, engineered for swift and reliable quality control across petroleum, materials, and plastics applications.

Price on request

Featured

Hitachi

X-Supreme 8000

High-performance EDXRF analyzer for low-level sulfur, chlorine and multi-element measurement in fuels and lubricants.

Price on request

A semi-automatic solution for carbon residue analysis

Normalab

A semi-automatic solution for carbon residue analysis

The NMC 215 measures carbon residues in petroleum products! Its compact design makes it easy to integrate into a variety of laboratory environments.

Price on request

Tanaka

Abel Closed Cup Flash Point Tester

abl-8 is an automated Abel Closed Cup flash point tester.

Price on request

Scavini

Abel Flash Point Tester

Manual equipment with the heating bath realized exactly as reported in the IP 33 - IP 170 methods and equipped with electric heating, digital temperature display, gas ignitor and electric stirrer

Price on request

Advanced analysis for carbon residue determination

Normalab

Advanced analysis for carbon residue determination

The NMC 445 makes it easy to measure carbon residues in petroleum products according to ASTM D4530, offering precise results thanks to 18 customizable methods!

Price on request

Scavini

Aging Oils

The apparatus consists of a benchtop case hosting the heating block and a frame supporting the stirring mechanism. The block has a series of jackets for the sample containers: a turntable permits to assemble the sample containers before putting them in the jackets all together. The block can reach temperatures up to 150°C +/- 0.1°C: it is heated by means of a coaxial heater. The stirring device is actuated by means of an electronically piloted gear reduced motor connected to a cam: it is regulated for 25 rpm.

Price on request

An automatic solution for salt content analysis

Normalab

An automatic solution for salt content analysis

The NSB Tech automatically measures salt content in crude oil and bitumen to ASTM D3230, delivering accurate results in less than 30 seconds.

Price on request

Linetronics

Aniline Point

Additional Instruments Aniline Bitumen Blends Calorimetry Centrifuge Cold Behaviours Colourimetry Corrosion Demulsibility and Foaming Densimetry Distillation Flash Point Gum - Rubber Hydrometers LPG Lubricating Greases and Oils Oxidation Penetration Residues Rust Sediments Sulfur Thermometers Vapour Pressure Viscosimetry Water Wax

Price on request

Tanaka

Aniline Point Tester

A tester to determine aniline point for wide range of samples

Price on request

Scavini

Anti-Rust Power Of Oils

The apparatus consists of a benchtop case containing a dry block heater or a stainless steel tank and a support for the stirrer motors. Each position is equipped with an independent motor: in this way it is possible to use single positions and leave turned off the motors of the positions not used.

Price on request

Scavini

Anti-Rust Power Oils

The apparatus consists of a floor mounted case containing a stainless steel tank and the rotating mechanism. A control box located on the right side contains all the electronics.

Price on request

Apparatus Determination Evaporation Loss Of Greases And Oils

Scavini

Apparatus Determination Evaporation Loss Of Greases And Oils

The apparatus, in acc. with ASTM D 972 – IP 183, consists of a case containing a stainless steel bath and supporting precision flowmeters. The bath is equipped with a stainless steel cover with holes for the introduction of the evaporation cells.

Price on request

Apparatus Determination Hihg Temperature Evaporation Loss

Scavini

Apparatus Determination Hihg Temperature Evaporation Loss

The apparatus, in acc. with ASTM D 2595, consists of a case hosting the aluminium block and supporting precision flowmeters. The block has jackets for the introduction of the cups: the air preheater is in the bottom. Each position is equipped with a digital display, connected to a thermocouple, that continuously shows the temperature of the air coming out from the cell.

Price on request

Apparatus For Determining The Thin Film Volatility Of Bitumen

Scavini

Apparatus For Determining The Thin Film Volatility Of Bitumen

The apparatus, in acc. with ASTM D 2872 - EN 12607, consists of a forced air circulation oven suitable for temperatures up to 180°C and equipped with a rotating shelf placed inside along with a coil that preheats the air directed into the sample container. This test is used to determine the effect of heat and air on a moving film of semi-solid asphaltic materials. The effects of this treatment are determined from measurements of the properties of the asphalt before and after having heated in a oven for 75 minutes at 163°C a moving film of asphaltic material while air at a rate of 4 l/min is directed against the sample.

Price on request

Tamson

ASTM 6594

The ASTM D6594 test method covers testing diesel engine lubricants to determine their tendency to corrode various metals, specifically alloys of lead and copper commonly used in cam followers and bearings. Four metal specimens of copper, lead, tin, and phosphor bronze are immersed in a measured amount of engine oil. The oil, at an elevated temperature, blown with air for a period of time. When the test is completed, the copper specimen and the stressed oil are examined to detect corrosion and corrosion products, respectively. A reference oil is tested with each group of tests to verify test ac

Price on request

Astm D1160 Distillation System - DIST D1160

Biolab

Astm D1160 Distillation System - DIST D1160

Fully automatic ASTM D1160 Distillation System for the determination of boiling ranges of oil products under vacuum.

Price on request

Tamson

ASTM D1298 density apparatus

The Tamson ASTM D1298 density apparatus is an apparatus to determine the density of petroleum products by hydrometer. The apparatus consists of the Tamson TLC15-5 cooling circulator and a rack with jacketed cylinders to keep the samples at the desired temperatures. The apparatus has three positions and can optionally be extended to a six position apparatus.

Price on request

Tamson

ASTM D2158 precooling equipment

Precooling equipment as described per ASTM-D2158. A copper tube is formed into a cooling coil. A sample valve is attached to flow petroleum gas through the coil and a 3mm needle valve is opened as the outlet of the gas. The coil and the two valves are fixed onto the top plate of the construction. The rugged construction ensures safe opeation of both valves whilst the construction can be easily taken out of the bath for maintenance an cleaning.

Price on request

ASTM D2892 Distillation System - DIST D2892

Biolab

ASTM D2892 Distillation System - DIST D2892

Processor controlled ASTM D2892 distillation system for fully automatic operation of crude oil True Boiling Point (TBP) analysis.

Price on request

Tamson

ASTM D3231 Constant temperature bath

The Tamson ASTM D3231 constant temperature bath can be used to heat samples for Phosphorus in Gasoline tests. The bath can hold eight volumetric flasks submerged to the mark. The temperature needed for the test method is between 82.2°C and 87.8°C. The robust Tamson ASTM D3231 constant temperature bath is capable to heat the samples to this temperature exactly as presribed in ASTM D3231 and IP 454.

Price on request

Tamson

ASTM D4807 apparatus

The Tamson ASTM D4807 apparatus is designed for sediment determinations by membrane filtrations in crude oil. Tamson supplies a complete apparatus for this test method, including the robust TC16 circulator bath, jacketed funnel, filtered flask, vacuum pump and stand. The TC16 is equipped with a levelling platform and a cover with rings to preheat the toluene in a beaker at +90°C. The Tamson ASTM D4807 apparatus is equipped with a jacketed funnel, which is much safer to use than wired copper around a single wall funnel.

Price on request

ASTM D5853 Pour Point of Crude Oils Bath

Tamson

ASTM D5853 Pour Point of Crude Oils Bath

The test method covers the determination of the pour point temperatures of crude oil down to -36°C. This bath is needed for this test method to preheat the sample. Tamson also supplies a single adjustable pour point bath. Please see the separate D97 and D2500 specification sheet. The cover of the bath has six openings, each with a lid and hook for suspending a copper corrosion test vessel (P/N 14T0100). Or the openings can accommodate test tubes in holders (P/N 14T0102). The temperature range is from ambient +5°C to 250°C.

Price on request

Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123 Use the contact form