Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

Featured

Hitachi

X-Supreme 8000

High-performance EDXRF analyzer for low-level sulfur, chlorine and multi-element measurement in fuels and lubricants.

Price on request

Peak Instruments

0.01mg balance

5. Built-in ARM32-bit microprocessor makes the instrument run fast and measure with high accuracy.

Price on request

Peak Instruments

0.1mg balance

5. Built-in ARM32-bit microprocessor makes the instrument run fast and measure with high accuracy.

Price on request

Peak Instruments

1mg balance

5. Built-in ARM32-bit microprocessor makes the instrument run fast and measure with high accuracy.

Price on request

A semi-automatic solution for carbon residue analysis

Normalab

A semi-automatic solution for carbon residue analysis

The NMC 215 measures carbon residues in petroleum products! Its compact design makes it easy to integrate into a variety of laboratory environments.

Price on request

PG Instruments

AA500 Atomic Absorption

The instrument is available with a flame atomiser and graphite furnace. Three flame options are available namely - Air/Acetylene, N2O/Acetylene and Air/LPG (Natural gas). The system can be fully automated via either our Universal Auto-sampler OR a Random Access Auto-sampler. Hydride analyse is also available can also be FULLY automated. The instrument is FULLY controlled via our 'user-friendly' software AAWin. With more than 1000 units sold World Wide the AA500 is used in many locations and for many applications and well accepted as a High Specification and reliable system.

Price on request

PG Instruments

AA990 ATOMIC ABSORPTION

The 990 Atomic Absorption Spectrophotometer is a versatile entry level instrument computer controlled an Air/Acetylene flame ONLY for general laboratory needs.

Price on request

Biolab

AIR JET EROSION TESTER

Price on request

Linetronics

Aniline Point

Additional Instruments Aniline Bitumen Blends Calorimetry Centrifuge Cold Behaviours Colourimetry Corrosion Demulsibility and Foaming Densimetry Distillation Flash Point Gum - Rubber Hydrometers LPG Lubricating Greases and Oils Oxidation Penetration Residues Rust Sediments Sulfur Thermometers Vapour Pressure Viscosimetry Water Wax

Price on request

Apparatus Determination Hihg Temperature Evaporation Loss

Scavini

Apparatus Determination Hihg Temperature Evaporation Loss

The apparatus, in acc. with ASTM D 2595, consists of a case hosting the aluminium block and supporting precision flowmeters. The block has jackets for the introduction of the cups: the air preheater is in the bottom. Each position is equipped with a digital display, connected to a thermocouple, that continuously shows the temperature of the air coming out from the cell.

Price on request

Apparatus For Determining The Thin Film Volatility Of Bitumen

Scavini

Apparatus For Determining The Thin Film Volatility Of Bitumen

The apparatus, in acc. with ASTM D 2872 - EN 12607, consists of a forced air circulation oven suitable for temperatures up to 180°C and equipped with a rotating shelf placed inside along with a coil that preheats the air directed into the sample container. This test is used to determine the effect of heat and air on a moving film of semi-solid asphaltic materials. The effects of this treatment are determined from measurements of the properties of the asphalt before and after having heated in a oven for 75 minutes at 163°C a moving film of asphaltic material while air at a rate of 4 l/min is directed against the sample.

Price on request

Nabertherm

Ashing Furnaces up to 1100 °C

Ashing furnace LV(T) .. 11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.

Price on request

Tamson

ASTM 6594

The ASTM D6594 test method covers testing diesel engine lubricants to determine their tendency to corrode various metals, specifically alloys of lead and copper commonly used in cam followers and bearings. Four metal specimens of copper, lead, tin, and phosphor bronze are immersed in a measured amount of engine oil. The oil, at an elevated temperature, blown with air for a period of time. When the test is completed, the copper specimen and the stressed oil are examined to detect corrosion and corrosion products, respectively. A reference oil is tested with each group of tests to verify test ac

Price on request

PG Instruments

Auto-Titration & KF Analysis

The 12 series of Automated Titration performs the fundamental task of titration where the concentration of a chemical substance is determined by reacting it with a measured amount of another chemical. The Auto Titrator performs this analysis using a motor driven dispenser, stirred reaction vessel and electrodes which sense the completion of the reaction by measuring the potential difference between two electrodes.

Price on request

Scavini

Automated Foaming Test Apparatus

Twin units can be equipped with variable area flowmeters or with mass-flow controllers and touch-screen interface capable to automatically blow the requested air amount into the sample in the prescribed amount of time, save and store data, print test reports.

Price on request

Automatic Apparatus For Determination The Point Of Sliding And Turbidity Of Products Petroleum

Scavini

Automatic Apparatus For Determination The Point Of Sliding And Turbidity Of Products Petroleum

Innovative, small size stand-alone equipment acc. to ASTM D 97 and D 2500 - IP 15 and 219 - ISO 3015 and 3016 with touch-screen interface and integrated cryostat (CFC/HCFC free) capable to reach -120°C. USB and Ethernet ports permits to connect printer or link the instrument to LIMS.

Price on request

Scavini

Automatic Demulsivity Tester

Automatic instrument with four independent positions and CCD camera that continuously monitors the oil/water separation: pictures taken at 5-min intervals are saved and printed as test reports.

Price on request

Automatic Equipment For The Determination Of The Softening Point Of The Ball And Ring Bitumen Method

Scavini

Automatic Equipment For The Determination Of The Softening Point Of The Ball And Ring Bitumen Method

The apparatus, in acc. with ASTM D 36 - IP 58 - ISO 4625 is a benchtop model which houses the components and a Panel PC with touch screen. A software running under Microsoft Windows embedded permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument offering in the meanwhile all the features of Windows systems such as LAN connectivity. Besides, a unique cooling system, not fitted on other instruments permits to quickly cool down the sample allowing to handle the glassware and to perform a greater number of tests during a day by reducing the dead times between two analysis. The apparatus is suitable also to test coating mixtures and other materials different from bitumen. The softening point is the temperature at which a disk of the sample held within a horizontal ring is forced downward a distance of 25.4 mm under the mass of a steel ball as the sample is heated at a prescribed rate in a water or glycerine bath.

Price on request

Automatic Pensky Martens Flash Point Tester With Barometric Correction Of The Result

Scavini

Automatic Pensky Martens Flash Point Tester With Barometric Correction Of The Result

The only equipment on the market with the stove, air bath and top plate manufactured exactly as reported on the ASTM D 93 method. The instrument features electric heating, stirrer and dipping mechanism, barometric temperature correction, plus a touch-screen interface that permits to introduce test data, save and retrieve reports, print them and allow diagnostic and calibration.

Price on request

Biolab

Biolab Analysis Systems - Clor-N-Oil PCB Monitoring Kits

Clor-N-Oil PCB Monitoring Kits are fast, accurate method to test electrical insulating fluids for the presence of PCB.

Price on request

Peak Instruments

BT-4000S Benchtop Turbidity Meter

●The unique high-precision filter system makes the instrument more stable and accurate.

Price on request

Peak Instruments

C-7000UV

Steady, modern and elegant appearance design. Adopt the newest microcomputer technology and electronic control system. Optimized optical system and structure can both extend new functions and ensure the accuracy, stability and durability.

Price on request

Peak Instruments

C-7000V

Price on request

Lumex

Capel-105M

Capel-105M is an advanced capillary zone electrophoresis system for food industry, environmental applications, pharmaceutical and chemical industries, biochemistry, and forensic science CAPEL-105M is a capillary electrophoresis system for fast and effective solutions for food industry, environmental applications, pharmaceutical and chemical industries, biochemistry and forensic science.

Price on request

Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123 Use the contact form