Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

Tanaka

Cloud Point Tester for Surfactants

A tester to determine cloud point test of nonionic surfactants

Price on request

Cold Temperature Viscometer - Viscol 10J

Biolab

Cold Temperature Viscometer - Viscol 10J

Viscol-10J, Full Automatic Cold Temperature Viscometer, for unattended sub-zero analysis of kinematic viscosity with highest precision.

Price on request

Tanaka

Colorimeter for Petroleum Products

A tester to determine 4 kinds of Colors, utilizing the Tri-Stimulus values from spectroscopy method

Price on request

Combined Distillation System - ASTM D2892/D5236

Biolab

Combined Distillation System - ASTM D2892/D5236

fully computer controlled combined distillation system of turn-key design, and ready for use after installation and commissioning.

Price on request

Scavini

Computer Controlled Ductility Machine

The apparatus, in acc. with ASTM D 113, D 5976 - IP 32 - ISO 1208 EN 13398, 13589, 13703 consists of a constant temperature bath capable to work in the range from -10 to 40 °C (thanks to a built-in cooling compressor) with an electrically powered tractor that pulls apart at an selectable speed the two ends of two briquet specimens: a load cell records continuously the force applied to the briquets transmitting them plus the bath temperature and the carriage speed to a PC through the RS-232 serial interface or USB port (converter required): a data acquisition software permits to display data on graphs, store them on the hard-disk, obtain printed reports and calibrate temperature, force and elongation sensors.

Price on request

CoolCheck Antifreeze and Diesel Exhaust Fluid Analysis System

Biolab

CoolCheck Antifreeze and Diesel Exhaust Fluid Analysis System

Price on request

Tamson

Copper Corrosion Bath

The test method covers the detection of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, natural gasoline or other hydrocarbons having a Reid Vapour Pressure no greater than 18 psi. The cover of the bath has six openings, each with a lid and hook for suspending a copper corrosion test vessel (P/N 14T0100). Or the openings can accommodate test tubes in holders (P/N 14T0102). The temperature range is from ambient +5°C to 250°C.

Price on request

Scavini

Copper Corrosion Of LPG

The apparatus consists of a benchtop steel case containing a stainless steel bath with a cover with up to eight jackets that allow the introduction of the vessels and a control box containing all the electronics.

Price on request

Scavini

Corrosion Foil Silver

The apparatus, suitable for the execution of the test at 50°C, consists of a steel case containing a stainless steel bath with a four-hole cover for the test tubes and a manifold for connecting water to the condensers.

Price on request

Scavini

Corrosion On Aluminum

The apparatus consists of a base supporting one or two heat-transfer corrosion cells. Cells are rated for a working pressure up to 40 psi and working temperature up to 160 °C. An electronic timer permits to set the test duration while an electronic thermostat is used to control the temperature.

Price on request

Scavini

Corrosion On Copper Foil

The apparatus, suitable for the execution of the test at 40, 50 and at 100°C, consists of a benchtop steel case containing a stainless steel bath with a four-hole cover to allow the introduction of the vessels or the test tubes and a control box containing all the electronics.

Price on request

Scavini

Corrosione Su Lamina Di Rame E Argento

The apparatus, consists of a benchtop steel case containing a stainless steel bath: the cover has a series of holes suitable for both glassware for copper and silver strip corrosion tests and vessels for copper strip corrosion test. Two manifolds permit to easily connect cooling water to silver corrosion glassware.

Price on request

Normalab

CPP and CFPP tester (ASTM D 97/D 6371)

The CPP Classic measures the cloud point and pour point as well as the filterability limit temperature of lubricating oils, fuels and diesel oil.

Price on request

Biolab

D156 Saybolt Chromometer

Price on request

Biolab

D1742 Oil Separation From Grease Tester

Price on request

Biolab

D244 Asphalt Residue by Distillation

Price on request

Tamson

D2440 SIX POS APPARATUS COMPLETE 230V

The Tamson ASTM D2440 apparatus can also be used for tests in accordance with IP280, IP306 and IP307. Please contact Tamson for more information.

Price on request

Biolab

D721 Oil and Solvent in Wax

Price on request

Biolab

D86 Atmospheric Distillation System

Price on request

Biolab

D892 Foaming Characteristics Analyzer

D892 Foaming Characteristics Analyzer, determines the foaming characteristics of lubricating oils at 24°C and 93.5°C according to ASTM D892.

Price on request

Tanaka

Data File Export System

PC software that outputs test data to a file from Tanaka instruments

Price on request

DEM Tech analyzes oil and water separation

Normalab

DEM Tech analyzes oil and water separation

Using ASTM D 1401, the DEM Tech measures the ability of synthetic oils and fluids to separate from water, and allows 4 analyses in the same bath

Price on request

Demulsibility Mechanical In Oil Lubricants D 2711

Scavini

Demulsibility Mechanical In Oil Lubricants D 2711

Four-place apparatus acc. to ASTM D 2711 with electric lifting mechanism, digital tachometer, adjustable speed electric stirrer, electronic temperature controller, level and overtemperature alarm. Differently from many equipment on the market having electronics placed on the top cover and subject to overheating and ageing, ours has a separate control box placed on the right side of the instrument.

Price on request

Scavini

Determination Foaming Bath

Single-unit apparatus with two jackets acc. to ASTM D 892 - IP 146 for tests at 24 and 93.5°C. Equipped with electronic temperature controller, variable area flowmeters, level and overtemp alarm. Differently from many equipment on the market having electronics subject to overheating and quick ageing because placed on the bath cover, ours has a separate control box placed on the right side of the instrument.

Price on request

Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123 Use the contact form