Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

Biolab

FluidScan Infrared Oil Analyzer

Price on request

Foamer-A40 Foaming Characteristics Analyzer

Biolab

Foamer-A40 Foaming Characteristics Analyzer

Foamer-A40 Foaming Characteristics (tendency) Analyzer is fully automated according to ASTM D892, D6082, D1881, D7840 and custom methods.

Price on request

Foaming test for machining fluids (NF T 60-185)

Normalab

Foaming test for machining fluids (NF T 60-185)

CNOMO evaluates the foaming tendency of aqueous machining fluids, in solution or emulsion, in water or any other aqueous liquid.

Price on request

Linetronics

Fuel Blending

Additional Instruments Aniline Bitumen Blends Calorimetry Centrifuge Cold Behaviours Colourimetry Corrosion Demulsibility and Foaming Densimetry Distillation Flash Point Gum - Rubber Hydrometers LPG Lubricating Greases and Oils Oxidation Penetration Residues Rust Sediments Sulfur Thermometers Vapour Pressure Viscosimetry Water Wax

Price on request

Biolab

Fuel Oil Ageing Bath

Ager Fuel Oil Ageing Bath is 6 position dry-block with temperature control for tests according to ASTM D4870, ISO 10307, IP 375, IP 390.

Price on request

Oxford Instruments

GeoSpec Rock Core Analyzer

GeoSpec benchtop TD-NMR determines key properties of rock cores, reservoirs, and fluids, accurately measuring oil and water volumes, porosity, permeability, wettability, capillary pressure, and saturation. Designed to replicate logging tools, it supports high-pressure, high-temperature studies, enables advanced petrophysics investigations, enhanced oil recovery (EOR), and carbon capture and storage (CCS / CCUS) research using intuitive software.

Price on request

Scavini

Glassware Corrosion Test

Innovative equipment acc. to ASTM D1384 with solid block heating, touch-screen interface and mass-flow controllers that permit to maintain a constant air flow even in case of fluctuation of inlet air pressure: temperature and air flow are recorded and plotted on a chart on the screen. The instrument is also fitted with a water distributor and sink for condensers cooling water and a device that permits to maintain the the condensers themselves in position while removing the sample containers at the end of the test.

Price on request

Scavini

Grease Worker

The apparatus is in acc. with ASTM D 217 - IP 50 - ISO 2137. Worked penetration results may be used to establish the consistency of lubricating greases after prolonged working. The change in worked penetration results on a grease after prolonged working are believed to be a measure of its shear stability under the conditions of the test. The electrically operated grease working machine consists of a geared motor for 60 strokes/min mounted on a aluminium base with clamps to fix the grease workers. The number of strokes, continuously showed on a display, can be preset to stop the worker after any required number of strokes up to 100,000.

Price on request

GWM Classic, ASTM D 217 compliant grease mixer

Normalab

GWM Classic, ASTM D 217 compliant grease mixer

The GWM Classic facilitates grease blending for ASTM D 217 penetration tests, offering 60 strokes/min with 67 mm displacement!

Price on request

Scavini

High-Temp. Foaming Bath

Single-unit apparatus with two jackets acc. to ASTM D 6082 for tests at 150°C. Equipped with electronic temperature controller, variable area flowmeters, level and overtemp alarm. The instrument has a safety enclosure that avoids accidental contacts with the hot jar.

Price on request

Scavini

Hot Filtration

The apparatus consists of a support hosting two filtering units. A unique mechanism permits to the operator to stay far from hot parts of the instrument during the operations to avoid risks of burnings.

Price on request

Hydrocarbon analysis in accordance with ASTM D1319

Normalab

Hydrocarbon analysis in accordance with ASTM D1319

The FIA Classic separates and quantifies aromatics, olefins and saturates in liquid petroleum products, from 1 to 95% saturates!

Price on request

Hydrolytic Stability In Hydraulic Fluids

Scavini

Hydrolytic Stability In Hydraulic Fluids

The apparatus consists of a benchtop oven with a turntable inside that can carry four or eight 200 ml Coca-Cola bottles. The turntable rotates the bottles at 5 rpm.

Price on request

InfraCal 2 ATR-B - Biodiesel In Diesel Analyzer

Biolab

InfraCal 2 ATR-B - Biodiesel In Diesel Analyzer

The InfraCal 2 Biodiesel Blend Analyzer for measuring percent biodiesel in diesel is the ideal solution for quick, on-site measurements.

Price on request

InfraCal 2 ATR-E - Ethanol In Gasoline Analyzer

Biolab

InfraCal 2 ATR-E - Ethanol In Gasoline Analyzer

The InfraCal 2 Biodiesel Blend Analyzer for measuring percent biodiesel in diesel is the ideal solution for quick, on-site measurements.

Price on request

$Infracal Total Oil & Grease Analyzer$

Biolab

Infracal Total Oil & Grease Analyzer

Price on request

Lumex

InfraLUM FT-08

Fourier Transform Infrared spectrometer InfraLUM FT-08 is designed for both qualitative and quantitative analysis for chemical, pharmaceutical, and oil and gas industries, as well as environmental monitoring, and forensic investigations This multipurpose and easy-to-operate instrument provides a well-suited option for various analytical laboratories. The high-quality misalignment-proof optics, high-sensitivity DLATGS detector, and a wide variety of accessories ensure the users’ absolute confidence in the high accuracy of the measurement data and make it an ideal tool for routine measurements a

Price on request

Lumex

InfraLUM FT-12 Express FT-NIR analyzer

InfraLUM FT-12 is a multipurpose near-IR FT spectrometer designed for industrial and laboratory analysis of various samples InfraLUM FT-12 FT-NIR analyzer is ideal for routine laboratory testing. With a single device, users can measure key nutritional values and safety parameters in cereals, feed, flour, legumes, milk and dairy products, meat and meat products, oil and oilseeds, beverages, and more.

Price on request

Lumex

InfraLUM FT-12 WholeGrain

InfraLUM WholeGrain Analyzer is a near-IR FT spectrometer designed for laboratory analysis of basic properties/constituents of grain, such as protein, fats, moisture, sugar, cellulose, starch, fibres, etc. Rapid analysis of grain quality parameters (determination of protein, moisture, gluten content, vitreousness and other parameters of wheat). Determination of oil content, protein and other quality parameters of interest in cereals and grain legumes. Analysis results are obtained within 1.5 minutes, no reagents required.

Price on request

LNF Q200 Particle Counter & Ferrous Content Analyzer

Biolab

LNF Q200 Particle Counter & Ferrous Content Analyzer

Price on request

Loss On Heating Of Asphaltic Compounds And The Combined Effect Of Air And Heat On Bitumens,

Scavini

Loss On Heating Of Asphaltic Compounds And The Combined Effect Of Air And Heat On Bitumens,

The apparatus consists of a convection oven manufactured as described in the ASTM E 145 specification (type IB), suitable for temperatures up to 180°C and equipped with a rotating shelf inside. An electronic controlled motor with gear reducer mounted on the top of the oven rotates the shelf at 5.5 rpm.

Price on request

Manual measurement of the penetrability of your materials

Normalab

Manual measurement of the penetrability of your materials

This manual penetrometer, which complies with the ASTM D5 standard, allows you to carry out analyses on your greases, waxes and bitumens at lower cost!

Price on request

Normalab

Manual viscosity bath

Price on request

Measuring asphaltene content in petroleum products

Normalab

Measuring asphaltene content in petroleum products

Optimize your asphaltene quantification tests in petroleum products and crude oil in correlation with ASTM D6560, IP 143 and NF T 60-115, guaranteeing reliable results.

Price on request

Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123 Use the contact form