Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

OilLab 571 Oxidation Stability of Steam Turbine Oils

Linetronics

OilLab 571 Oxidation Stability of Steam Turbine Oils

ASTM D942 - Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method. This test method determines resistance of lubricating greases to oxidation when stored statically in an oxygen atmosphere in a sealed system at an elevated temperature under conditions of test.

Price on request

Linetronics

OilLab 580 - Noack

Determination of the evaporation loss of lubricating oils (particularly engine oils). Procedure A uses the Noack evaporative tester equipment. Procedure B uses the automated non-Woods metal Noack evaporative apparatus.

Price on request

Linetronics

OilLab 590 - Air Release

Standard Test Method for Air Release Properties of Hydrocarbon Based Oils. This test methods cover the ability of turbine, hydraulic and lubricating oils to separate entrained air.

Price on request

Linetronics

OilLab 600 - Pensky Martens

Flash Point on petroleum products, gas oils, fuel oils, lubrificants, biodiesel. Suitable for flash point detection on different substances, waste materials, solvents…

Price on request

Linetronics

OilLab 6000 - Leonardo Pensky Martens

Flash Point on petroleum products, gas oils, fuel oils, lubrificants, biodiesel. Suitable for flash point detection on different substances, waste materials, solvents…

Price on request

Linetronics

OilLab 611 - Aniline Point

Price on request

Linetronics

OilLab 615 Penetration

ASTM D5, IP 49, DIN 52010 Penetration of bituminous material. For determination of the penetration of semi-solid and solid bituminous materials.

Price on request

OilLab 620 RECC - Rapid Equilibrium Closed Cup

Linetronics

OilLab 620 RECC - Rapid Equilibrium Closed Cup

These test methods cover procedures for the determination of the flash point by a small scale closed tester. The procedures may be used to determine the actual flash point temperature of a sample or whether a product will or will not flash at a specified temperature (flash/no flash).

Price on request

Linetronics

OilLab 650 - OilLab 650 Plus Abel

Flash point on petroleum products having a flash point between -18°C and 71°C (kerosene and solvents). Suitable for flash point detection on different substances and waste materials, solvents…

Price on request

Linetronics

OilLab 6560 - Golleo Abel+Pensky

Subject Flash point on petroleum products having a flash point between -18°C and 71°C (kerosene and solvents). Suitable for flash point detection on different substances and waste materials, solvents…

Price on request

Linetronics

OilLab 670 - Cleveland

The Flash Point detection system, which is composed by a ring sensor for the ionization’s determination, constitutes the essential component granting high repeatability and excellent results. Furthermore, a sensor detects the presence of the flame for fire point determination. The device are mounted on a mechanical arm with automatic positioning during analysis.

Price on request

Linetronics

OilLab 690 - Tag

Flash point on petroleum products having a flash point between ambient temperature and +93°C. Suitable for flash point detection on different substances and (NO) waste materials, solvents…

Price on request

Linetronics

OilLab 6901 - Tag

Subject Flash point on petroleum products having a flash point between ambient temperature and +93°C. Suitable for flash point detection on different substances and (NO) waste materials, solvents…

Price on request

Linetronics

OilLab 715 Reid Vapour Pressure

ASTM D323 - IP 69 - ISO 3007 Vapour Pressure of Petroleum Products (Reid Method) The test method covers the determination of vapour pressure of gasoline, volatile crude oil, by means of three procedures: A, B and C. The OilLab 715 grant the determination in conformity with the procedure B (horizontal bath) on petroleum products having Reid Vapour Pressures below 180 kPa (26 psi).

Price on request

Linetronics

OilLab 730 Ductilometer

Ductility of Bituminous Materials. The ductility of a bituminous material is measured by the distance to which it will elongate before breaking when two ends of a briquet specimen of the material are pulled apart at a specified speed and at a specified temperature. Unless otherwise specified, the test shall be made at a temperature of 77 0.9°F (25 0.5°C) and with a speed of 5 cm/min 5.0%. At other temperatures the speed should be specified.

Price on request

Linetronics

OilLab 740 Herschel Emulsifying

Water Separability of Petroleum Oils and Synthetic Fluids. This test method covers measurement of the ability of petroleum oils or synthetic fluids to separate from water.

Price on request

Biolab

OilLab 880 Saybolt Viscometer

Price on request

Linetronics

OilLab 880/S Saybolt Viscometer

ASTM D88 Saybolt Viscosity Determination of the Saybolt Universal or Saybolt Furol viscosities of petroleum products at specified temperatures between 21 and 99°C.

Price on request

OilLab 900 Automatic Refrigerated Distillation Unit Analyser Stand Alone

Linetronics

OilLab 900 Automatic Refrigerated Distillation Unit Analyser Stand Alone

ASTM D216 (obs.), ASTM D447 (obs.) - Distillation Test Method.

Price on request

OL600 Pensky Martens Flash Point Analyzer

Biolab

OL600 Pensky Martens Flash Point Analyzer

Price on request

Biolab

OL670 Cleveland Flash Point Analyzer

Price on request

Optimize the performance of your oils with ARV Tech

Normalab

Optimize the performance of your oils with ARV Tech

Complying with ASTM D 3427, the ARV Tech allows you to determine the ability of hydraulic, turbine and motor oils to separate entrained air.

Price on request

Scavini

Oxidation And Corrosion

4-6-8 or 12-place apparatus acc. to FTMS 791 - 5308.4 with aluminum block heater and variable area dedicated flowmeters for each position. Versions with mass flow controllers and Panel PC also available, please contact us.

Price on request

Scavini

Oxidation Fuel Oil

4-6-8 or 12-place apparatus acc. to ASTM D 2274 - IP 388 with aluminum block heater and variable area dedicated flowmeters for each position. Versions with mass flow controllers and Panel PC also available, please contact us.

Price on request

Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123 Use the contact form