CHEMPARTSMIDDLE EAST FZCMEDICAL & LABORATORY SUPPLIES
CartSign inRegister+971 6 5574047

[HOME]/[PRODUCTS]/INSTRUMENTS

Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

[545] instruments · showing 337–360
Oil Condition Sensor
Biolab

Oil Condition Sensor

Joint Oil Analysis Program (JOAP) Compliant Spectrometric Oil Standards for Rotational Disc Electrode Elemental Analzyers

Price on request
Oil slicks detector CRAB
Lumex

Oil slicks detector CRAB

CRAB - optical sensor of the water surface oil slicks CRAB is an easy-to-operate, active oil slicks optical detector.

Price on request
OilLab 230 Filterability of Lubricating Oils
Linetronics

OilLab 230 Filterability of Lubricating Oils

Procedure for the evaluation of the filterability of lubricating oils, particularly those designed for hydraulic applications, in the presence of water. The procedure only applies to mineral-based oils, since fluids manufactured from other materials (e.g. fire-resistant fluids) may not be compatible with the specified test membranes.

Price on request
OilLab 500 - Ring and Ball
Linetronics

OilLab 500 - Ring and Ball

The sample is heated in a liquid bath respecting the heating rate prescribed by the standards test methods. During this procedure the product gradually become softer and when the test ball fall a distance of 25 mm the softening point is determined.

Price on request
OilLab 510 - Foaming Tester
Linetronics

OilLab 510 - Foaming Tester

Foaming characteristics of lubricating oils: this test method covers the determination of the foaming characteristics of lubricating oils at 24°C and 93.5°C. Means of empirically rating the foaming tendency and the stability of the foam are described.

Price on request
OilLab 525 Oxidation Stability of Gasoline and Aviation Fuels
Linetronics

OilLab 525 Oxidation Stability of Gasoline and Aviation Fuels

ASTM D525 - IP 40 - EN ISO 7536 - Oxidation Stability of Gasoline (Induction Period Method) This test method covers the determination of the stability of gasoline in finished form only, under accelerated oxidation conditions.

Price on request
OilLab 560 - Evaporation Bath
Linetronics

OilLab 560 - Evaporation Bath

Gum Content in Fuels by Jet Evaporation This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasolines or other volatile distillates in their finished form (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of test.

Price on request
OilLab 570 Oxidation Stability by Pressure Vessel
Linetronics

OilLab 570 Oxidation Stability by Pressure Vessel

Gum Content in Fuels by Jet Evaporation This test method covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasolines or other volatile distillates in their finished form (including those containing alcohol and ether type oxygenates and deposit control additives) at the time of test.

Price on request
OilLab 571 Oxidation Stability of Steam Turbine Oils
Linetronics

OilLab 571 Oxidation Stability of Steam Turbine Oils

ASTM D942 - Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method. This test method determines resistance of lubricating greases to oxidation when stored statically in an oxygen atmosphere in a sealed system at an elevated temperature under conditions of test.

Price on request
OilLab 580 - Noack
Linetronics

OilLab 580 - Noack

Determination of the evaporation loss of lubricating oils (particularly engine oils). Procedure A uses the Noack evaporative tester equipment. Procedure B uses the automated non-Woods metal Noack evaporative apparatus.

Price on request
OilLab 590 - Air Release
Linetronics

OilLab 590 - Air Release

Standard Test Method for Air Release Properties of Hydrocarbon Based Oils. This test methods cover the ability of turbine, hydraulic and lubricating oils to separate entrained air.

Price on request
OilLab 600 - Pensky Martens
Linetronics

OilLab 600 - Pensky Martens

Flash Point on petroleum products, gas oils, fuel oils, lubrificants, biodiesel. Suitable for flash point detection on different substances, waste materials, solvents…

Price on request
OilLab 6000 - Leonardo Pensky Martens
Linetronics

OilLab 6000 - Leonardo Pensky Martens

Flash Point on petroleum products, gas oils, fuel oils, lubrificants, biodiesel. Suitable for flash point detection on different substances, waste materials, solvents…

Price on request
OilLab 611 - Aniline Point
Linetronics

OilLab 611 - Aniline Point

OilLab 611 - Aniline Point

Price on request
OilLab 615 Penetration
Linetronics

OilLab 615 Penetration

ASTM D5, IP 49, DIN 52010 Penetration of bituminous material. For determination of the penetration of semi-solid and solid bituminous materials.

Price on request
OilLab 620 RECC - Rapid Equilibrium Closed Cup
Linetronics

OilLab 620 RECC - Rapid Equilibrium Closed Cup

These test methods cover procedures for the determination of the flash point by a small scale closed tester. The procedures may be used to determine the actual flash point temperature of a sample or whether a product will or will not flash at a specified temperature (flash/no flash).

Price on request
OilLab 650 - OilLab 650 Plus Abel
Linetronics

OilLab 650 - OilLab 650 Plus Abel

Flash point on petroleum products having a flash point between -18°C and 71°C (kerosene and solvents). Suitable for flash point detection on different substances and waste materials, solvents…

Price on request
OilLab 6560 - Golleo Abel+Pensky
Linetronics

OilLab 6560 - Golleo Abel+Pensky

Subject Flash point on petroleum products having a flash point between -18°C and 71°C (kerosene and solvents). Suitable for flash point detection on different substances and waste materials, solvents…

Price on request
OilLab 670 - Cleveland
Linetronics

OilLab 670 - Cleveland

The Flash Point detection system, which is composed by a ring sensor for the ionization’s determination, constitutes the essential component granting high repeatability and excellent results. Furthermore, a sensor detects the presence of the flame for fire point determination. The device are mounted on a mechanical arm with automatic positioning during analysis.

Price on request
OilLab 690 - Tag
Linetronics

OilLab 690 - Tag

Flash point on petroleum products having a flash point between ambient temperature and +93°C. Suitable for flash point detection on different substances and (NO) waste materials, solvents…

Price on request
OilLab 6901 - Tag
Linetronics

OilLab 6901 - Tag

Subject Flash point on petroleum products having a flash point between ambient temperature and +93°C. Suitable for flash point detection on different substances and (NO) waste materials, solvents…

Price on request
OilLab 710 ASVP - Air Satured Vapour Pressure
Linetronics

OilLab 710 ASVP - Air Satured Vapour Pressure

Automatic analyser for determination of Air Satured Vapour Pressure - DVPE

Price on request
OilLab 715 Reid Vapour Pressure
Biolab

OilLab 715 Reid Vapour Pressure

OilLab 715 Reid Vapour Pressure

Price on request
OilLab 715 Reid Vapour Pressure
Linetronics

OilLab 715 Reid Vapour Pressure

ASTM D323 - IP 69 - ISO 3007 Vapour Pressure of Petroleum Products (Reid Method) The test method covers the determination of vapour pressure of gasoline, volatile crude oil, by means of three procedures: A, B and C. The OilLab 715 grant the determination in conformity with the procedure B (horizontal bath) on petroleum products having Reid Vapour Pressures below 180 kPa (26 psi).

Price on request
Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123Use the contact form
WhatsApp