CHEMPARTSMIDDLE EAST FZCMEDICAL & LABORATORY SUPPLIES
CartSign inRegister+971 6 5574047

[HOME]/[PRODUCTS]/INSTRUMENTS

Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

[545] instruments · showing 481–504
TB30 ASTM D1838 Copper Corrosion of LPG
Tamson

TB30 ASTM D1838 Copper Corrosion of LPG

The Tamson TB30 ASTM D1838 is a bath designed for copper corrosion tests of LPG. The TB30 conforms to ASTM D1838, EN/ISO 6251, IP411, BS2000 Part 411, BS6924, NF M41-007. The robust TB30 is designed to hold up to four LPG cylinders for copper corrosion tests. The compact TB30 can operate at 37.8°C without the use of counter-cooling. The cover in the TB30 has openings, so that the user can visually check the LPG cylinder when it is in the bath.The TB30 can be supplied with all accessories needed for corrosion tests.

Price on request
TC16 used for ASTM-D1796
Tamson

TC16 used for ASTM-D1796

The TC16 ASTM D1796 bath is designed to preheat the centrifuge cones as required when follwing the determination for water and sediment in fuel oils (ASTM D1796) or crude oils (ASTM D4007) by the centrifuge method. The robust TC16 is according to the requirements of the ASTM D1796 test method where a water bath is prescribed to preheat the cone-shaped centrifuge tubes. With the levelling platform and special designed rack, nine 8" cone shaped centrifuge tubes can be immersed up to the 100 mL mark, as prescribed in the ASTM methods.

Price on request
TC16 used for ASTM-D4870
Tamson

TC16 used for ASTM-D4870

The TC16 ASTM D4870 ageing bath offers six positions for ageing of the sample for the total sediment test. The bath can be delivered complete will all accessories to age the sample conform the test method. The temperature can be set from ambient +5°C to 250°C. The wetted parts in the TC16 are made from stainless steel. The TC16 is used for precise temperature control and offers high reliability for use under rough circumstances. The insulation of the bath and electronic design result in a stable working temperature of ± 0.02°C. The set point temperature can be set in steps of 0.1°C in the rang

Price on request
TC16 used for ASTM-D565 and ASTM-D612
Tamson

TC16 used for ASTM-D565 and ASTM-D612

The Tamson TC16 is an excellent solution for heating the samples conform ASTM D565 and ASTM D612. Tamson can supply the TC16 with the prescribed glassware and eight positions for heating of the sample. Optionally, we can also deliver the colour comparator that is required in the test method. The temperature can be set from ambient +5°C to 250°C. The wetted parts in the TC16 are made from stainless steel. The TC16 is used for precise temperature control and offers high reliability for use under rough circumstances. The insulation of the bath and electronic design result in a stable working temp

Price on request
TC16 used for ASTM-D612
Tamson

TC16 used for ASTM-D612

The Tamson TC16 is an excellent solution for heating the samples conform ASTM D565 and ASTM D612. Tamson can supply the TC16 with the prescribed glassware and eight positions for heating of the sample. Optionally, we can also deliver the colour comparator that is required in the test method. The temperature can be set from ambient +5°C to 250°C. The wetted parts in the TC16 are made from stainless steel. The TC16 is used for precise temperature control and offers high reliability for use under rough circumstances. The insulation of the bath and electronic design result in a stable working temp

Price on request
TC16 used for ASTM-D6468
Tamson

TC16 used for ASTM-D6468

The TC16 ASTM D6468 bath is designed to age middle distillate fuels under high temperature for ASTM D6468 tests. The test method covers relative stability of middle distillate fuels under high temperature aging conditions with limited air exposure. The TC16 can offer six (optionally nine) positions to insert holders with test tubes for this test method. The TC16 is very robust and can easily withstand the high test temperature of +150°C. Tamson is also able to supply the other accessories needed for tests according to ASTM D6468.

Price on request
TC16 used for ASTM-D70
Tamson

TC16 used for ASTM-D70

The TC16 ASTM D70 is designed for specific gravity and density by pycnometer tests. The bath is suitable for tests conform ASTM D70, IP 190 and ISO 3838. The brackets inside the TC16 can offer maximum nine positions for either Hubbard or Gay-Lussac pycnometers. The brackets and ridge keep the pycnometers in place during the test. The TC16 is equipped with a cooling coil to allow the use of counter-cooling. This cooling coil can be connectd to a TLC15-5 circulator when working at +15°C or +25°C.

Price on request
TC40 ASTM D4870 ageing bath
Tamson

TC40 ASTM D4870 ageing bath

The TC40 ASTM D4870 ageing bath offers six positions for ageing of the sample for the total sediment test. The bath can be delivered complete will all accessories to age the sample conform the test method. The TC40 is used for precise temperature control and offers high reliability for use under rough circumstances. The insulation of the bath and electronic design result in a stable working temperature of ± 0.02°C. The set point temperature can be set in steps of 0.1°C in the range of 0°C up to 250°C (32°F..482°F). The accuracy on the display is displayed in 0.1°C. However the controller has a

Price on request
TC40 ASTM D6468 bath
Tamson

TC40 ASTM D6468 bath

The TC40 ASTM D6468 bath is designed to age middle distillate fuels under high temperature for ASTM D6468 tests. The test method covers relative stability of middle distillate fuels under high temperature aging conditions with limited air exposure. The TC40 can offer 18 positions to insert holders with test tubes for this test method. The TC40 is very robust and can easily withstand the high test temperature of +150°C. Tamson is also able to supply the other accessories needed for tests according to ASTM D6468.

Price on request
TC40 Copper Corrosion Bath
Tamson

TC40 Copper Corrosion Bath

The TC40 copper corrosion bath offers 18 positions for copper corrosion tests. The bath is an excellent solution for users that run a lot of copper corrosion tests or test the copper corrosion over a long period of time. Tamson can deliver all necessary accessories for copper corrosion tests according to ASTM D130. The TC40 is maintenance-free and very robust. The TC40 is used for precise temperature control and offers high reliability for use under rough circumstances. The insulation of the bath and electronic design result in a stable working temperature of ± 0.02°C. The set point temperatur

Price on request
TC40 Silver Corrosion Bath
Tamson

TC40 Silver Corrosion Bath

This test method specifies the determination of the corrosive tendencies towards silver of aviation turbine fuel, automotive spark-ignition engine oils or automotive gasoline. The result is classified as an integer in the range 0 to 4. The bath offers place for 18 test positions. The temperature range is from ambient +5°C to 250°C. The bath can also be used for copper corrosion tests, please see our specification sheet for ASTM D130 and related methods.

Price on request
TC40 THERMOSTATIC BATH 230V/50-60Hz
Tamson

TC40 THERMOSTATIC BATH 230V/50-60Hz

The TC40 copper corrosion bath offers 63 positions for the glass test tube for copper corrosion tests. The bath is an excellent solution for users that run a lot of copper corrosion tests or test the copper corrosion over a long period of time. Tamson can deliver all necessary accessories for copper corrosion tests according to ASTM D130. The TC40 is maintenance-free and very robust. The TC40 is used for precise temperature control and offers high reliability for use under rough circumstances. The insulation of the bath and electronic design result in a stable working temperature of ± 0.02°C.

Price on request
TCC-B D1837 bath
Tamson

TCC-B D1837 bath

The sample is refrigerated by means of a cooling coil and collect 100 mL of liquid in a weathering tube, The sample allowed to evaporate ( “weather") at ambient pressure under specified conditions. When 5 mL of liquid test portion remains, the observed temperature is corrected for barometric pressure and thermometer ice point error, and reported as 95 % evaporation temperature.

Price on request
TCC-B D2158 bath
Tamson

TCC-B D2158 bath

This method evaluates the cleanliness and quality of LPG by measuring substances that do not readily vaporize. A LPG sample is condensated by refrigeration and evaporated under controlled conditions. The sample is refrigerated by means of a cooling coil to collect 100 mL of liquid in a weathering tube. The sample is than allowed to evaporate ( “weather") at ambient pressure under specified conditions. The remaining residu is observed.

Price on request
TCC-B D97 D2500 bath
Tamson

TCC-B D97 D2500 bath

The TCC-B D97 D2500 is a bath for manual cloud and pour point tests conform ASTM D97 and ASTM D2500. The TCC-B can be equipped with a cover that offers position for four jackets. The bath can be delivered with all accessories needed for manual cloud and pour point tests. The TCC-B is a single adjustable bath and therefore a very budget-friendly solution to test the cloud and pour point down to -85°C.

Price on request
Test your oils at high temperatures to ASTM 6082!
Normalab

Test your oils at high temperatures to ASTM 6082!

FOAM HT evaluates the foaming characteristics of lubricating oils up to 150°C according to ASTM D6082, with four test sequences in a single bath.

Price on request
Test your oils with FOAM 1 & 2
Normalab

Test your oils with FOAM 1 & 2

These devices evaluate the foaming characteristics of lubricating oils with tests at 24 °C and 93.5 °C thanks to 2 test positions per bath.

Price on request
The Apparatus Determination Oxidation Stability Of Greases With Recorder
Scavini

The Apparatus Determination Oxidation Stability Of Greases With Recorder

New automatic benchtop equipment acc. to ASTM D 942 available in 2, 4 or 6-position versions, with aluminum block heating. Vessels are equipped with pressure transducers, cables and quick connectors while the touch-screen interface plots pressure and temperature data on a chart and allows user to enter, save, retrieve, print test reports and run diagnostic and calibration routines. Ethernet and USB ports permit to connect to LIMS or printers.

Price on request
Thermodesorber
Biolab

Thermodesorber

Thermodesorber

Price on request
Thermostatic Bath For Thermostatting Of Samples By Penetration,
Scavini

Thermostatic Bath For Thermostatting Of Samples By Penetration,

The equipment, in acc with ASTM D 5 - D 217, consists of a compact benchtop circulation cooler to be placed below the bench supporting the penetrometer: thanks to a built-in cooling compressor, temperature can be maintained in a range from 0 to 50°C with 0.1°C precision.

Price on request
Thermostatic Bath For Thermostatting Of Samples By Penetration,
Scavini

Thermostatic Bath For Thermostatting Of Samples By Penetration,

The equipment, in acc with ASTM D 5 - D 217, consists of a compact benchtop circulation cooler to be placed below the bench supporting the penetrometer: thanks to a built-in cooling compressor, temperature can be maintained in a range from 0 to 50°C with 0.1°C precision.

Price on request
Thin Film Evaporator - DS50
Biolab

Thin Film Evaporator - DS50

Rotary thin-film evaporator with thermostat mantle and internal condenser for for the production and processing of molecular substances.

Price on request
TL7000 Total Acid/Base Number Titrator
Biolab

TL7000 Total Acid/Base Number Titrator

TL7000 is the ideal starting device for potentiometric titration with potential for expansion and automation.

Price on request
TL7500 Karl Fischer Water Content Analyzer
Biolab

TL7500 Karl Fischer Water Content Analyzer

The TL7500 KF is for water determination according to Karl Fischer (KF) titration method with a typical operating range of 1 ppm - 5% water.

Price on request
Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123Use the contact form
WhatsApp