Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

Scavini

Flash Point Tester Cleveland Manual

Manual equipment realized exactly as reported in the ASTM D 92 - IP 36 - ISO 2592 methods and equipped with electric heating, digital temperature display and gas ignitor.

Price on request

Scavini

Flash Point Tester Pensky Martens

Manual equipment with the stove, air bath and top plate realized exactly as reported in the ASTM D 93 - IP 34 - ISO 2719 methods and equipped with electric heating, digital temperature display, gas ignitor and electric stirrer.

Price on request

Biolab

FluidScan Infrared Oil Analyzer

Price on request

Lumex

Fluorat-02-series analyzers

Fluorat-02 makes a baseline for a number of analytical fluorometric, photometric, and chemoluminometric techniques Both FLUORAT-02-4M and FLUORAT-02-5M models are capable of fluorescence, chemiluminescence and photometry measurements. FLUORAT-02-4M also provides phosphorescence measurement using the time-resolved gating fluorometer mode. In particular, this mode is used to determine uranium and is characterized by a very high sensitivity and selectivity.

Price on request

Foamer-A40 Foaming Characteristics Analyzer

Biolab

Foamer-A40 Foaming Characteristics Analyzer

Foamer-A40 Foaming Characteristics (tendency) Analyzer is fully automated according to ASTM D892, D6082, D1881, D7840 and custom methods.

Price on request

Foaming test for machining fluids (NF T 60-185)

Normalab

Foaming test for machining fluids (NF T 60-185)

CNOMO evaluates the foaming tendency of aqueous machining fluids, in solution or emulsion, in water or any other aqueous liquid.

Price on request

Forced Convection Chamber Furnaces – Tabletop Design electrically heated

Nabertherm

Forced Convection Chamber Furnaces – Tabletop Design electrically heated

These forced convection chamber furnaces are characterized by their good temperature uniformity. Due to the compact tabletop design, this series is very well suited for installation in laboratories or rooms with limited space.Applications include preheating of components for shrink-fit processes, heat treatment of metals in air such as aging, stress relieving, soft annealing or tempering, and heat treatment of glass.

Price on request

Forced Convection Chamber Furnaces up to 500 Liter Safety Technology

Nabertherm

Forced Convection Chamber Furnaces up to 500 Liter Safety Technology

Due to their very good temperature uniformity, these chamber furnaces with air circulation and safety equipment based on EN 1539 Type A are especially suitable for processes such as drying paints or components with residues of flammable cleaning agents or the evaporation of solvents bound in the components.

Price on request

Forced Convection Chamber Furnaces up to 675 Liter electrically heated

Nabertherm

Forced Convection Chamber Furnaces up to 675 Liter electrically heated

The very good temperature uniformity of these chamber furnace with air circulation provides for ideal process conditiones for annealing, curing, solution annealing, artificial ageing, sintering of PTFE, preheating, or soft annealing and brazing. The forced convection chamber furnaces are equipped with a suitable annealing box for soft annealing of copper or tempering of titanium, and also for annealing of steel under non-flammable process gases. The modular forced convection chamber furnace design allows for adaptation to specific process requirements with appropriate accessories.

Price on request

Peak Instruments

FP Series Flame Photometer

A Flame Photometer is used to measure the concentration of metal ions in test materials, like K, Na, Li, Ca and Ba. It can be widely used in agriculture, mineral extraction, food, Chemical composites, pathology research, clinical and pharmaceutical sample analysis, etc. Our flame photometers are perfect for accurate and reliable metal ion analysis because of their professional and user-friendly design.

Price on request

Freezing point — Determination Of Freezing Point

Normalab

Freezing point — Determination Of Freezing Point

Price on request

FTIR 7800A Fourier Transform Infrared Spectrometer

PG Instruments

FTIR 7800A Fourier Transform Infrared Spectrometer

Michelson Interferometer FTIR Spectrophotometer with a spectral range of 7800 to 350cm-1. The 7800 has a small foot print with fully sealed and dust proof interferometer optics.

Price on request

Linetronics

Fuel Blending

Additional Instruments Aniline Bitumen Blends Calorimetry Centrifuge Cold Behaviours Colourimetry Corrosion Demulsibility and Foaming Densimetry Distillation Flash Point Gum - Rubber Hydrometers LPG Lubricating Greases and Oils Oxidation Penetration Residues Rust Sediments Sulfur Thermometers Vapour Pressure Viscosimetry Water Wax

Price on request

Biolab

Fuel Oil Ageing Bath

Ager Fuel Oil Ageing Bath is 6 position dry-block with temperature control for tests according to ASTM D4870, ISO 10307, IP 375, IP 390.

Price on request

Oxford Instruments

GeoSpec Rock Core Analyzer

GeoSpec benchtop TD-NMR determines key properties of rock cores, reservoirs, and fluids, accurately measuring oil and water volumes, porosity, permeability, wettability, capillary pressure, and saturation. Designed to replicate logging tools, it supports high-pressure, high-temperature studies, enables advanced petrophysics investigations, enhanced oil recovery (EOR), and carbon capture and storage (CCS / CCUS) research using intuitive software.

Price on request

Scavini

Glassware Corrosion Test

Innovative equipment acc. to ASTM D1384 with solid block heating, touch-screen interface and mass-flow controllers that permit to maintain a constant air flow even in case of fluctuation of inlet air pressure: temperature and air flow are recorded and plotted on a chart on the screen. The instrument is also fitted with a water distributor and sink for condensers cooling water and a device that permits to maintain the the condensers themselves in position while removing the sample containers at the end of the test.

Price on request

Biolab

GPN-18 Nitrogen Generator

Price on request

Gradient or Lab Strand Annealing Furnaces up to 1300 °C

Nabertherm

Gradient or Lab Strand Annealing Furnaces up to 1300 °C

The furnace chamber of the gradient furnace GR 1300/13 is divided in six control zones of equal length. The temperature in each of the six heating zones is separately controlled. The gradient furnace is usually charged from the side through the parallel swivel door. A maximum temperature gradient of 400 °C can then be stabilized over the heated length of 1300 mm. On request the furnace also is designed as a lab strand annealing furnace with a second door on the opposite side. If the included fiber separator are used charging is carried-out from the top.

Price on request

Scavini

Grease Worker

The apparatus is in acc. with ASTM D 217 - IP 50 - ISO 2137. Worked penetration results may be used to establish the consistency of lubricating greases after prolonged working. The change in worked penetration results on a grease after prolonged working are believed to be a measure of its shear stability under the conditions of the test. The electrically operated grease working machine consists of a geared motor for 60 strokes/min mounted on a aluminium base with clamps to fix the grease workers. The number of strokes, continuously showed on a display, can be preset to stop the worker after any required number of strokes up to 100,000.

Price on request