CHEMPARTSMIDDLE EAST FZCMEDICAL & LABORATORY SUPPLIES
CartSign inRegister+971 6 5574047

[HOME]/[PRODUCTS]/INSTRUMENTS

Instruments

Analytical instruments & equipment

XRF, flash point, distillation, mercury, NMR, FTIR, viscosity and more — supplied, installed and serviced in-region. Filter by brand and industry, then request a quote.

[545] instruments · showing 25–48
Apparatus Determination Hihg Temperature Evaporation Loss
Scavini

Apparatus Determination Hihg Temperature Evaporation Loss

The apparatus, in acc. with ASTM D 2595, consists of a case hosting the aluminium block and supporting precision flowmeters. The block has jackets for the introduction of the cups: the air preheater is in the bottom. Each position is equipped with a digital display, connected to a thermocouple, that continuously shows the temperature of the air coming out from the cell.

Price on request
Apparatus For Determination Of Freezing Point Of Antifreeze
Scavini

Apparatus For Determination Of Freezing Point Of Antifreeze

The only equipment on the market fully acc. to ASTM D1177 (other equipment available frequently use the ASTM D2386 sample volume that is 25 ml while D1177 prescribes 75 to 90 ml) is equipped with an integrated cryostat capable to reach -120°C, sample and seeding jacket, touch-screen interface, Ethernet and two USB ports to connect printers or LIMS. The built-in seeding jacket permits to avoid the need of a powerful cryostat to freeze the sample portion requested for seeding.

Price on request
Apparatus For Determining The Thin Film Volatility Of Bitumen
Scavini

Apparatus For Determining The Thin Film Volatility Of Bitumen

The apparatus, in acc. with ASTM D 2872 - EN 12607, consists of a forced air circulation oven suitable for temperatures up to 180°C and equipped with a rotating shelf placed inside along with a coil that preheats the air directed into the sample container. This test is used to determine the effect of heat and air on a moving film of semi-solid asphaltic materials. The effects of this treatment are determined from measurements of the properties of the asphalt before and after having heated in a oven for 75 minutes at 163°C a moving film of asphaltic material while air at a rate of 4 l/min is directed against the sample.

Price on request
AR5 Refractometer System
Biolab

AR5 Refractometer System

AR5 Refractometer System

Price on request
AriaDNA
Lumex

AriaDNA

Polymerase chain reaction (PCR) real-time analyzer AriaDNA for fast and cost-efficient PCR analysis Polymerase chain reaction (PCR) is now often indispensable technique used in medical and biological research labs for a variety of applications including qualitative and quantitative nucleic acid analysis; DNA cloning for sequencing, DNA-based phylogeny, or functional analysis of genes; the diagnosis of hereditary diseases; the identification of genetic fingerprints (used in forensic sciences and paternity testing); and the detection and diagnosis of infectious diseases.

Price on request
Ashing Furnaces up to 1100 °C
Nabertherm

Ashing Furnaces up to 1100 °C

Ashing furnace LV(T) .. 11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.

Price on request
Ashing Furnaces with Integrated Exhaust Gas Cleaning up to 1100 °C
Nabertherm

Ashing Furnaces with Integrated Exhaust Gas Cleaning up to 1100 °C

The ashing furnaces L ../11 BO are specially designed for processes in which organic substances have to be evaporated from the charge, as e. g. during debinding of small ceramic products after additive manufacturing. Other processes, for which this furnace series is designed for, are for example, ashing of (food) samples, thermal cleaning of injection molding tools or loss on ignition determination.

Price on request
ASTM 6594
Tamson

ASTM 6594

The ASTM D6594 test method covers testing diesel engine lubricants to determine their tendency to corrode various metals, specifically alloys of lead and copper commonly used in cam followers and bearings. Four metal specimens of copper, lead, tin, and phosphor bronze are immersed in a measured amount of engine oil. The oil, at an elevated temperature, blown with air for a period of time. When the test is completed, the copper specimen and the stressed oil are examined to detect corrosion and corrosion products, respectively. A reference oil is tested with each group of tests to verify test ac

Price on request
ASTM D1122 density apparatus
Tamson

ASTM D1122 density apparatus

The Tamson ASTM D1298 apparatus is available in the following voltages/frequencies:

Price on request
Astm D1160 Distillation System - DIST D1160
Biolab

Astm D1160 Distillation System - DIST D1160

Fully automatic ASTM D1160 Distillation System for the determination of boiling ranges of oil products under vacuum.

Price on request
ASTM D1298 density apparatus
Tamson

ASTM D1298 density apparatus

The Tamson ASTM D1298 density apparatus is an apparatus to determine the density of petroleum products by hydrometer. The apparatus consists of the Tamson TLC15-5 cooling circulator and a rack with jacketed cylinders to keep the samples at the desired temperatures. The apparatus has three positions and can optionally be extended to a six position apparatus.

Price on request
ASTM D1384 Apparatus
Tamson

ASTM D1384 Apparatus

The Tamson ASTM D1384 bath is a bath with all the accessories to perform tests according to ASTM D1384, which is a corrosion test for engine coolants in glassware. The apparatus can also be used to perform tests in accordance with ASTM D7935, ASTM D8040, ASTM D8485 and SH/T0085, which is a corrosion test for heat transfer fluids or for EV coolants in glassware. The robust ASTM D1384 apparatus offers six positions and is delivered with six sets of glassware. Also, six flowmeters are included in our apparatus. The glassware used in the ASTM D1384 apparatus is very robust and uses a clamp to ensu

Price on request
ASTM D1429 density apparatus
Tamson

ASTM D1429 density apparatus

The Tamson ASTM D1298 apparatus is available in the following voltages/frequencies:

Price on request
ASTM D1837 precooling equipment
Tamson

ASTM D1837 precooling equipment

Precooling equipment as described per ASTM-D1837 figure2. Containing 2 stainless steel valves. The cooling coil construction ensures safe operation and prevents touching of cold areas. It provides proper closing of the bath and insulate for proper use.

Price on request
ASTM D1838 Copper Strip Corrosion Test Cylinder
Tamson

ASTM D1838 Copper Strip Corrosion Test Cylinder

Stainless steel cilinder to be used for LPG sample taking and perform corrosion tests. The inside of the cylider has a hook to position a cupper strip for testing. Two valves are mounted on each ends.

Price on request
ASTM D2158 precooling equipment
Tamson

ASTM D2158 precooling equipment

Precooling equipment as described per ASTM-D2158. A copper tube is formed into a cooling coil. A sample valve is attached to flow petroleum gas through the coil and a 3mm needle valve is opened as the outlet of the gas. The coil and the two valves are fixed onto the top plate of the construction. The rugged construction ensures safe opeation of both valves whilst the construction can be easily taken out of the bath for maintenance an cleaning.

Price on request
ASTM D287 density apparatus
Tamson

ASTM D287 density apparatus

The Tamson ASTM D1298 apparatus is available in the following voltages/frequencies:

Price on request
ASTM D2892 Distillation System - DIST D2892
Biolab

ASTM D2892 Distillation System - DIST D2892

Processor controlled ASTM D2892 distillation system for fully automatic operation of crude oil True Boiling Point (TBP) analysis.

Price on request
ASTM D3142 density apparatus
Tamson

ASTM D3142 density apparatus

The Tamson ASTM D3142 apparatus is available in the following voltages/frequencies:

Price on request
ASTM D3231 Constant temperature bath
Tamson

ASTM D3231 Constant temperature bath

The Tamson ASTM D3231 constant temperature bath can be used to heat samples for Phosphorus in Gasoline tests. The bath can hold eight volumetric flasks submerged to the mark. The temperature needed for the test method is between 82.2°C and 87.8°C. The robust Tamson ASTM D3231 constant temperature bath is capable to heat the samples to this temperature exactly as presribed in ASTM D3231 and IP 454.

Price on request
ASTM D4807 apparatus
Tamson

ASTM D4807 apparatus

The Tamson ASTM D4807 apparatus is designed for sediment determinations by membrane filtrations in crude oil. Tamson supplies a complete apparatus for this test method, including the robust TC16 circulator bath, jacketed funnel, filtered flask, vacuum pump and stand. The TC16 is equipped with a levelling platform and a cover with rings to preheat the toluene in a beaker at +90°C. The Tamson ASTM D4807 apparatus is equipped with a jacketed funnel, which is much safer to use than wired copper around a single wall funnel.

Price on request
ASTM D5853 Pour Point of Crude Oils Bath
Tamson

ASTM D5853 Pour Point of Crude Oils Bath

The test method covers the determination of the pour point temperatures of crude oil down to -36°C. This bath is needed for this test method to preheat the sample. Tamson also supplies a single adjustable pour point bath. Please see the separate D97 and D2500 specification sheet. The cover of the bath has six openings, each with a lid and hook for suspending a copper corrosion test vessel (P/N 14T0100). Or the openings can accommodate test tubes in holders (P/N 14T0102). The temperature range is from ambient +5°C to 250°C.

Price on request
ASTM D6822 density apparatus
Tamson

ASTM D6822 density apparatus

The Tamson ASTM D6822 apparatus is available in the following voltages/frequencies:

Price on request
ASTM D6922 bath
Tamson

ASTM D6922 bath

The TLC80-14 ASTM D6922 bath is an apparatus for the determination of homogeneity and miscibility in automotive engine oils. For this test method it is necessary to use both a TC16 high temperature bath and a low temperature cloud and pour point bath. Tamson can supply both apparatus. The TLC40-14 and TLC80-14 ASTM D6922 offer position for seven jackets, as is prescribed in the test method.

Price on request
Need help shortlisting?

Tell us your requirement.

Send us the method, model or part you need. We'll come back with the right shortlist — usually within the working day.

WhatsApp +971 55 756 6123Use the contact form
WhatsApp